Plumbers in Dunwoody, GA

Plumbing

Customers water pressure is exceeding 80 psi. Thermal expansion tank is undersized for 100 gallons of hot water. Main shut off valve is leaking in ceiling. Replace all items and bring up to code.

Shower drain clogged and right side of double vanity clogged. Customer stated they tried to clear drain themselves and couldn’t get it. Gave customer estimate to clear both drains. Customer approved estimate. Cleared shower drain and pulled back chunks of hair. Pulled pop up assembly on right side of vanity to find build up on stopper. Tested both drains, they are draining and working with no issues or leaks.

Plumbing

Replaced corroded galvanized pipes with PEX. Cut out old pipes using reciprocating saw. Installed Uponor PEX-a tubing with ProPEX expansion fittings. Used Milwaukee M12 ProPEX expansion tool for connections. Installed new quarter-turn shutoff valves. Pressure tested system to 100 PSI for 15 minutes. Insulated hot water lines with foam pipe insulation.

Cleared main sewer line blockage. Used RIDGID K-7500 drum machine with 3/4" cable and spear head attachment. Navigated through 4" clay pipe to remove tree root intrusion 50 feet from cleanout. Verified clear line with RIDGID SeeSnake camera. Applied RootX foam to inhibit future growth. Restored normal drain flow to all fixtures.

Left quote for leak search

Cleared a clogged shower drain and, to ensure thorough cleaning, poured sulfuric acid down the drain to break up any remaining debris. This method helps prevent future blockages and ensures smooth water flow.

Have to get roots out before we can give accurate quote for line replacement. High likelihood that line is going to cross under the driveway. Jetter roots out of terracotta pipe. Left quote to replace sewer line. Tie in spot in transition from terracotta to concrete right before driveway.

Replaced water service, 2 hose bibs, PRV, minor reroute inside basement

Drain repair

Plumbing

Plumbing

Plumbing installation. Installed a pressure reducing valve to regulate the water pressure in a residential home's plumbing system. By carefully adjusting the valve, we ensured that the home's pipes and fixtures would be protected from excessive pressure.

Gas line

I conducted a comprehensive drain inspection and repair in Dunwoody, GA. Using a high-resolution RIDGID SeeSnake camera system, I thoroughly examined the main sewer line, identifying multiple issues including root intrusions, pipe corrosion, and a partial collapse at the 40-foot mark. I employed hydro-jetting to clear debris and roots, then installed a 6-foot trenchless pipe liner to address the collapsed section. For areas with severe corrosion, I used a pipe bursting technique to replace 20 feet of old clay pipe with new HDPE piping. Post-repair camera inspection confirmed the successful restoration of proper flow and structural integrity.

Drains

Stop valve

Shower Repair

Capped pipes

Install kitchen faucet and hot water recirculation kit.

Repaired hose spigot

Water heater

I recently replaced a water line to a refrigerator in a customer's kitchen. The old water line was made of vinyl and was deteriorating, so I removed it and installed a new stop valve behind the refrigerator. I then ran a new copper water line to the refrigerator and installed a new brass water connector. Finally, I tested the water flow and made sure the refrigerator was getting water.

I recently replaced a failed check valve to a sewer ejection pump at a client's home. The check valve was not functioning properly, causing sewage to back up into the home. I carefully removed the old check valve and replaced it with a new one. I tested the new check valve to ensure it was working correctly and then gave the client a demonstration of how the new check valve operates. The client was pleased with the job and thanked me for my professional service.