Check Out Our Work in Canton, GA
Chen Plumbing provides air conditioning, heating, water heater and plumbing services to the residents of Canton, GA and the surrounding areas since 1998!

Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Canton, GA.
Recent Jobs and Reviews in Canton, GA
Canton, GA at a glance
Chen Plumbing has completed 3 jobs in Canton, GA between December 2025 and February 2026.
The most recent job was on February 22, 2026.
Chen Plumbing has completed 26 jobs in Canton, GA in the last 12 months. The first job there was in April 2024.
Job Locations and Reviews
Camera inspection from clean out outside , found pvc drain under slab with some belly , replace toilet fill valve in master bathroom today , discussed and signed up membership with Mr. Adams today
Install new flange from above and reset toilet. Also cut into wall behind toilet around service valve and cut and install new service valve and supply line. *If we have to bust up concrete in order to replace flange there will be an additional charge and also if any other work is needed there will be an additional charge* Arrived and in men’s bathroom, found that toilet was already pulled and found that flange was broken and also service was leaking. Give customer quote for repairs needed, and customer agreed. Went ahead and installed new toilet flange and also new service valve. Tested and at this time there was no leaks present and toilet was working as it should. Caulked around base of toilet and cleaned up work area.
Customer called us out for leak in front of meter box. Gave starting price to bring out mini excavator, customer approved any repairs that were needed would be additional Leak detected in 1 inch PVC line near the meter after carefully hand digging around the area we located the leak at the metal to plastic connection upon presenting options to the customer. They approved replacing the affected section of the line. Additionally, the customer authorized us to remove the meter box clear out the mud and re- bed the box with gravel for better stability and drainage,We also replaced the failed PRV and it was positioned for easier future maintenance All work is tested and confirmed to be functioning as intended at the time of departure. Meter box and meter wires were damaged prior to us digging line. We are not responsible for those sensors compacted dirt as best as we could cleaned up area as best as we could. For future reference, please note the layout of the meters inside
