Check Out Our Work in Clarkston, GA
Chen Plumbing provides air conditioning, heating, water heater and plumbing services to the residents of Clarkston, GA and the surrounding areas since 1998!
Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Clarkston, GA.
Recent Jobs and Reviews in Clarkston, GA
Clarkston, GA at a glance
Chen Plumbing has completed 3 jobs in Clarkston, GA between June 2026 and July 2026.
The most recent job was on July 16, 2026.
Chen Plumbing has completed 29 jobs in Clarkston, GA in the last 12 months. The first job there was in November 2023.
Job Locations and Reviews
Customer stated that there was brown/colored water coming out of fixtures in home. Took a look around and found 2 sections of galvanized piping. Customer opted to just replace one section that was by Prv. Removed existing Prv and house shut off valve and installed new Prv and shut off. Also removed section of galvanized piping. Tested and no leaks present. Set water pressure to 65 psi. There is another piece of galvanized pipe that is feeding a toilet. Also do see that the main water line coming through wall is pvc and dug up by meter and also found pvc. Also customer mentioned that water hasn’t been ran in awhile which can also lead to sediment in pipes settling and once water is ran can cause discoloration. Also found that thermal expansion tank has failed and water heater is from 2013. Will send estimate for recommend repairs. Cleaned up work area. 1 year warranty on work completed today
This customer redid a couple things for him installed a new kitchen sink faucet installed two new angle stops for both the dishwasher and then the hot side faucet. The cold side angle stop was functioning. In addition to that the supply lines we attached to after that we tied the sink drain together installed a new basket strainer with a new P-trap and installed the new dishwasher hose along with the dishwasher supply line installed a new thermal expansion tank with a bracket had to configure the pipes in a certain way due to the angle after everything was installed there no leak leaks and the customer is all set.
Work sold for another tech
