About Us Get a quote Request Service Call Now

Plumber in Kennesaw, GA

Book Now

Check Out Our Work in Kennesaw, GA

Chen Plumbing provides air conditioning, heating, water heater and plumbing services to the residents of Kennesaw, GA and the surrounding areas since 1998!

Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Kennesaw, GA.

Recent Jobs and Reviews in Kennesaw, GA

Rated 5.0 out of 5 stars based on 5 customer reviews

Customers say: The overall sentiment is overwhelmingly positive, reflecting deep satisfaction and trust in the plumbing service. Customers consistently praise the technicians' professionalism, competence, and extensive knowledge, often noting how clearly and patiently problems and solutions were explained. Speed and reliability stand out as recurring strengths, with many reviewers highlighting punctual arrivals, quick responses, and efficient problem-solving, including accommodating after-hours and next-day requests. The friendly, courteous, and respectful demeanor of the staff comes up repeatedly, along with appreciation for their attention to detail, thoroughness, and tidiness, as work areas were often left clean. Many customers value the honest guidance and transparent options provided, which fosters a strong sense of confidence in the company. Loyalty is a notable theme, with several long-term customers describing multigenerational or decades-long relationships and expressing enthusiastic willingness to recommend the company and call on it again. Overall, the tone conveys gratitude, trust, and high regard for both the quality of the work and the exceptional customer service.

Kennesaw, GA at a glance

Chen Plumbing has completed 3 jobs in Kennesaw, GA in July 2026.

The most recent job was on July 23, 2026.

Chen Plumbing has completed 27 jobs in Kennesaw, GA in the last 12 months. The first job there was in August 2023.

Job Locations and Reviews

Flush 2 state tankless water heaters. All three water heaters are throwing a code 111. Code is for ignition failure. Going to order parts to service units.
Flush 2 state tankless water heaters. All three water heaters are throwing a code 111. Code is for ignition failure. Going to order parts to service units.
Anthony A.
Anthony A. Checked in
Flush 2 state tankless water heaters. All three water heaters are throwing a code 111. Code is for ignition failure. Going to order parts to service units.
Kennesaw, GA 30144
For this job came out to install two toilets repair a water heater and to jet out a sewer line. So therefore, I started on the water heater first I noticed that the gas line there was a small leak from the gas whip and it was old and it needed to be replaced so I recommended to get that replaced along with the proper sizing for the black iron, I also recommended to install new gas shut off valve, so that’s exactly what we did redid the venting on the water heater so it goes gradually up rather than dipping down to go up, additionally that has been fixed, moving on to the two toilets the one in the master bathroom I had to use a spanner flange in order to properly secure the bolt to the flange. There was a missing piece of the flange, so therefore rather than repairing it because of the way that it was nailed to the floor, I recommended to do a spanner flange repair and that’s exactly what we did. There’s no leaks coming from that toilet installed a new supply line and the customer is a
For this job came out to install two toilets repair a water heater and to jet out a sewer line. So therefore, I started on the water heater first I noticed that the gas line there was a small leak from the gas whip and it was old and it needed to be replaced so I recommended to get that replaced along with the proper sizing for the black iron, I also recommended to install new gas shut off valve, so that’s exactly what we did redid the venting on the water heater so it goes gradually up rather than dipping down to go up, additionally that has been fixed, moving on to the two toilets the one in the master bathroom I had to use a spanner flange in order to properly secure the bolt to the flange. There was a missing piece of the flange, so therefore rather than repairing it because of the way that it was nailed to the floor, I recommended to do a spanner flange repair and that’s exactly what we did. There’s no leaks coming from that toilet installed a new supply line and the customer is a
Shane S.
Shane S. Checked in
For this job came out to install two toilets repair a water heater and to jet out a sewer line. So therefore, I started on the water heater first I noticed that the gas line there was a small leak from the gas whip and it was old and it needed to be replaced so I recommended to get that replaced along with the proper sizing for the black iron, I also recommended to install new gas shut off valve, so that’s exactly what we did redid the venting on the water heater so it goes gradually up rather than dipping down to go up, additionally that has been fixed, moving on to the two toilets the one in the master bathroom I had to use a spanner flange in order to properly secure the bolt to the flange. There was a missing piece of the flange, so therefore rather than repairing it because of the way that it was nailed to the floor, I recommended to do a spanner flange repair and that’s exactly what we did. There’s no leaks coming from that toilet installed a new supply line and the customer is a
Kennesaw, GA 30144
Member visit , quote some repair do it later
Member visit , quote some repair do it later
Tim T.
Tim T. Checked in
Member visit , quote some repair do it later
Kennesaw, GA 30144
Areas We Serve