Check Out Our Work in Sandy Springs GA
Chen Plumbing provides air conditioning, heating, water heater and plumbing services to the residents of Sandy Springs, GA and the surrounding areas since 1998!

Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Sandy Springs, GA.
Recent Jobs and Reviews in Sandy Springs, GA
Sandy Springs, GA at a glance
Chen Plumbing has completed 3 jobs in Sandy Springs, GA between March 2026 and April 2026.
The most recent job was on April 1, 2026.
Chen Plumbing has completed 40 jobs in Sandy Springs, GA in the last 12 months. The first job there was in September 2023.
Job Locations and Reviews
Water heater t&p going off upon arrival. Customer stated the water constantly runs out the front from the t&p line. After checking pressure found it to be 95 informed customer the high pressure can cause the t&p to constantly run and could also be the cause for his hose Bibb dripping. Informed customer with the age of his water heater we could not repair the water heater but could replace it. Also informed customer we could the replace the PRV to lower the pressure and install a new ball valve with a new shutoff for it. Gave customer estimate, customer approved estimate. Installed new PRV and set the pressure to 65 psi. Installed new water heater with a new shutoff valve, pan, expansion tank, and re worked the t&p line. Also installed a new hose Bibb in the back yard with a new ball valve. Turned water back on to check for leaks and found no leaks. Fired up water heater and set it to the correct temperature. Water heater is fired up and no leaks upon departure
Call for toilets not working. Arrived and met with Ashley (house keeper). She showed me three toilets that had issues. Inspection revealed the following: Office toilet has been worked on, and universal parts were installed that are not compatible with Kohler one piece toilets. Flapper is failing, and handle is catching along tank wall. Guest bathroom toilet with ghost flush shows age on components. Fill valve and flapper are deteriorating. This is a Toto one piece toilet. Daughters bathroom has the wrong fill valve installed, and it’s pushing up on trip lever, causing a constant running toilet. There is also mildew or mold in the tank. When checking pressure I found that the pressure was inconsistent, and read at ~70 psi at around 1030 am on a weekday. When checking pressure pressure I discovered that the tankless water heaters had several significant concerns. The right side has been shut off and discontinued. The left side unit was flashing an error code and I can hear the unit
Left quotes for repairs
