Check Out Our Work in Stone Mountain GA
Chen Plumbing provides air conditioning, heating, water heater and plumbing services to the residents of Stone Mountain, GA and the surrounding areas since 1998!
Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Stone Mountain, GA.
Recent Jobs and Reviews in Stone Mountain, GA
Stone Mountain, GA at a glance
Chen Plumbing has completed 3 jobs in Stone Mountain, GA in May 2025.
The most recent job was on May 28, 2025.
Chen Plumbing has completed 176 jobs in Stone Mountain, GA in the last 12 months. The first job there was in August 2023.
Job Locations and Reviews
Replaced hose spigot from inside, crawlspace through front foundation of home. Hydraulic cement around penetration to seal and secure. 1 year warranty, does not include freeze breaks.
Customer ordered replacement cartridge for shower in hall bath in main floor with cross connection. Replaced the cartridge. Tested the cross connection and found a secondary cross connection was allowing some crossover still. Customer stated that since it’s a less severe cross connection that he will wait on further diagnosis to see how the house temperature is affected. Customer removed penal for hall tub to see if s mixing valve was present. There was no mixing valve for the tub that could be allowing a cross connection. Showed customer where the limiter button in the trim had dry rotted and was no longer functioning. Also pointed out that the shower head had low flow and likely needed to be addressed with replacement. Customer had questions regarding filtration for the home. Left quote for new reverse osmosis system and kitchen faucet. Replaced cracked slip joint under sink as a courtesy.
Customer had an aged out Aqua Source toilet that was leaking heavily from the tank to bowl bolts and seals. Recommended replacement due to the age and condition of the toilet. Replaced the toilet and inspected the flange. The flange is in good working order and the toilet seated correctly onto the flange. Tested all work to ensure proper function and no leaks. Caulk needs 24 hours to dry properly before getting wet.
